Every wet-end shell we cast, from squared booster bodies to long-head barrels and the covers and flange parts that close them.
Everything here is cast to a customer drawing, a 3D file or a worn sample — we publish no catalogue of standard parts, because there aren't any.
Square Casing
A squared outer shell for booster sets where the footprint is fixed.
View ›
Volute Casing
The spiral scroll, cast to the original profile.
View ›
Long-Head Casing
An extended nose barrel, for the higher head duty.
View ›
Short-Head Casing
The compact body: lower head duty, shorter overall length.
View ›
Pump Cover
The mating half, machined against the casing it closes.
View ›
Inlet / Outlet Flanges
The connection castings — threaded ports and bolted flange faces.
View ›
Jet Pump Casing
Self-priming jet casing with a threaded port boss
View ›
200W Pump Casing
108.8 × 79.8 × 166.8 mm · 3D model
View ›
550W Pump Casing
183.8 × 98.6 × 233.7 mm · 3D model
View ›
Twin-Outlet Pump Head
134.7 × 111.9 × 212.9 mm · 3D model
View ›
Elbow-Flange Pump Casing
127.8 × 183.5 × 99.7 mm · 3D model
View ›
Side-Inlet Pump Casing
148.3 × 95.4 × 193.7 mm · 3D model
View ›
Side-Inlet Casing, Short Boss
135.7 × 97.4 × 235.4 mm · 3D model
View ›
Round-Body Pump Casing
189.7 × 182.6 × 77 mm · 3D model
View ›From Your Drawing to the Batch
Send What You Have
A drawing, a 3D file, a nameplate photo or the worn part itself. We list what is dimensioned and what has to be confirmed before we quote.
Tooling Built In-House
Pattern and core boxes made here, from your geometry. On a 3D file there is no measuring stage, so it is the fastest route to a first sample.
First Article, Then the Batch
A sample off the production tooling, dimensioned against your drawing. Signed off, the same tooling runs the batch — minimum 100 pieces.
Which Body Do You Have?
| Construction | How you recognise it | Typical reason it was chosen |
|---|---|---|
| Square casing | Flat outer walls, square footprint | Two or more pumps sharing one skid |
| Volute casing | Round body, spiral scroll inside | Standard end-suction hydraulics |
| Jet pump casing | Threaded port boss, ejector inside | Self-priming domestic and garden duty |
| Long-head casing | Extended barrel ahead of the volute | Higher head from the same frame |
| Short-head casing | Compact, short overall length | Envelope limit on a packaged set |
| Elbow-flange body | Lies horizontal, elbow cast in | Discharge has to turn inside the pump |
| Side-inlet body | Suction boss on the side, not the end | Pump sits tight against a wall |
Send Your Drawing
Upload a 2D drawing, 3D file, nameplate photo or a picture of the worn part. We review material, tolerances, process route and inspection needs, then come back with a firm quotation.
Request a Quotation